Halman Horizon - 1984 27’-31' Cutter Rig Sailboat

Description

Located in North Port New York, currently in the water and can be viewed at Britannia Marine .

This a 27’ with 31’ overall with bow spread. Sleeps four very comfortably. The dinner table drops down and coverts to a sizable berth, 2 at the V berth and 1 at the starboard side. This is #41 of 47 made, built in Beamsville, Ontario Canada, Great Storage Space.

Photo of boat under full sail is of another Halman, just for show.

L.O.A - 27’ L.W.L 23’ Beam 9’8” Displ. 7,000 lbs. Draft - 4'.8" Ballast - 2,250 lbs.Sail Area - 320 sq. ft.

Unlike sailboats with a longer trailing transom, most of the helm is dedicated to people space.

This a Blue Water boat, with a round back for coming off the waves easy.

Teak Interior trough-out.

Designed by Michael Voller, and comes with a recent signed copy of the drawing from the designer .

Engine: Yanmar Diesel 2GM – 2 Cylinder 18 hp motor

Lawrence System 520C GPS System, and the original Standard Depth Sounder as backup .

Auto Pilot – 2000

New Main Sail 2016

New Bilge pump 2015

New Sail Covers 2015

New Two Solar Powered Cowl Vent ( RICRO )

New Cabin Sole (flooring) with 2 access hatches.

New electrical panel, main switch and AMP, volt meter.

New Captains Desk light,

New fresh water filler hose and head hose, IT needs a holding tank.

New Natus clutches, for halyards and sheets

New lines, for roller furling, drum and sail, Does not have a holding tank,

Rebuilt roller furiling and forestay 2015.

New wind vang, 2015

New Mainsail sheet.

Bottom paint 2016

Fresh water tank 30 gal, Fuel 10 gal.

Wine rack below cooler