Vintage Pocket Cruiser Saleboat

Description

This is a rare restored vintage 1982 Hunts 5.2 “Pocket Cruiser” Sailboat, Trailer and 4hp long-shaft motor all in Very good to excellent condition. Interior completely gutted and replaced and modernized in 2012-2014. Exterior brought back to very good condition. Exterior gelcoat in good condition. What you get is a comfortable compact cruiser that is easy to sail, light enough to tow with a class 3 hitch anywhere and can easily store.

Boat specifics:Beam: 7 feet 3 inches. Weighted Shoal Keel with retractable centerboard. Draft CB/U 15in. Draft CB/D 4ft. 3in. Weight 1200 lbs. Ballast: 400lbs. Sail Area: 155Sqft (Main sail and Jib). Kick up rudder completely restored. This boat is very stable and forgiving for novice sailors and loads of fun to sail. It has 2 vee-births and 2 quarter births and freshwater sink with wet bar. Very comfortable cabin. This boat is ready for the 2018 sailing season. Everything necessary to get on the water immediately.

Sailing upgrades: Headsail CDI roller furler, all new lines, Topping lift line, mast light, Tiller Tamer (Poor man’s auto-pilot) all making this boat easy to handle from the cockpit by one person.

Motor:(Optional) 2004 4hp long-shaft Mercury with 12VDC charging system (2) with internal gas tank. Last serviced in 2016. Runs excellent.If you don't need it subtract $400 from the final selling price.

Trailer: Galvanized Drydock trailer also rebuilt. Added 3rd wheel and Keel Guides for easy loading and unloading. Comes with 2 spare tires and trailer straps. Trailer tilts, and also breaks down to become garage storage cradle over winter. Whole rig can fit in a garage as little as 18 feet deep.

Many extras included: Custom cockpit cushions and floor grate, 650Ah deep cycle marine battery, AM/FM/CD radios (2), Transom ladder, solar charging panels (2), custom mooring, motor housing and roller furler covers. Boating equipment included: Mushroom anchor, paddle and fire extinguisher. This boat is extremely similar to the Vagabond 17. Setup takes approximately 30 minutes once you are familiar with the process.