Lighthouse 1501 Electric Windless

Description

LIGHTHOUSE 1501 WINDLASSMODEL: 1501 DWGVOLTAGE: 24 DC [Exchangable for any other voltage or system]WILDCATS: 3/8" High Test Chain [Exchangable for any other size]
FEATURES: (The following was taken from the Lighthouse website)
MULTIPLE OPERATIONAL CAPABILITIES:Port and Starboard chain retrieval and payout can be independently operated, or can be simultaneously operated in opposite directions (paying out one while retrieving another) also allows rope wildcats to be operated either independent of chain operations, or in conjunction with chain operations.MANUAL BACK-UP:Fast rewind socket port and starboard, or an amazing 10,200 lbs. On 2nd speed, with only 35 lbs. exerted on a 10" winch handle in kedging socket located on top of winch. Both manual modes are used in conjunction with a standard winch handle. Rope wildcat allows rapid rope retrieval and can be tailed, even under power.MOTOR DRIVE:Continuous duty linear power unit (no field windings to burn out). No external grounding required (unit cannot induce electrolysis). No overload protector required for motor. Reversing is optional without changing the motor. 12v, 24v, 32v, 110/220 VAC, and Hydraulic power are available.CONSTRUCTION:All stainless steel type 316L construction, sealed case lifetime lithium lubrication, mounted to built-in base plate. Comes with chain pipes & cast urethane deck seal.MOUNTING:Required deck space for mounting plate is L10" X W11.6", bowsprit mounts L12" X W4". Mounts with (6) ½" bolts. Motor mounts under deck and requires only 2" hole. Optional backing plates are available from the factory.GYPSY & WILDCAT:Standard cast bronze chromed gypsy; stainless steel wildcat port and starboard. ¼" through 7/16" BBB, PC, or System 40 HT are standard, others available on request.POWER CONSUMPTION:12v: free run=8amps/rated pull=80amps24v: free run=4amps/rated pull=40ampsCAPACITIES:Continuous line pull at 12v - 32v 1000 lbs. @ 37 fpm.Maximum, depends on available amperage power supply.DIMENSIONSHeight: 8" (203.2mm)Length: 9.5" (241.3mm)Width: 24" (609.60mm)Weight 110 lbs. (50.00 Kg)Depth: From top of deck: 14.5" (368.3mm). Unit will accept up to 4.5" (114.3mm) deck thickness as standard.

ACCESSORIES INCLUDED: [Descriptions downloaded from the Lighthouse website]
HAND HELD ROVING REMOTEDesigned for underwater use up to a depth of 50 ft. Allows operator to operate windlass from anywhere on deck. May be used to raise or lower dinghies, place cargo, cleaning of anchor from bow pulpit. The underwater operation of the windlass allows for freeing rodes or raising objects from underwater.
SUBMARINER REVERSING CIRCUITProvides a means of reversing windlass from a variety of owner designated stations while maintaining a safety electrical interlock that will prevent a short circuit. This might ordinarily result when multiple operators at multiple operation stations, such as; cockpit remotes, deck switches, or roving remotes, operate the windlass in opposing modes. In the event multiple operators simultaneously activate opposing directions the windlass instantly shuts itself off and waits for another instruction. Enclosures are manufactured of fire retardant, self-extinguishing fiberglass and are provided with four compression gland lock connectors. The units also come with one 6-foot pigtail harness, terminated at a stainless steel barrier strip for under deck connections. Contactors are 400 amp, continuous duty 4 pole type with silver contact surfaces. The submariner reversing circuit also serves as a central junction terminal for all accessories and remote stations that Lighthouse manufactures. The unit may also be located anywhere in the vessel for ready accessibility.

COCKPIT MOUNTED REMOTE CONTROL CONSOLE MODEL 2000The Model 2000 package consists of the meter, waterproof connectors at each end of the 12-wire harness, and two count sensors. The count function is displayed on the LCD as a negative (-) preceding the number, which identifies how much chain has been payed out. The chain counter knows automatically, the direction the chain is traveling, whether in or out, and will either add or subtract from that total. Thus giving you the number in feet of anchor chain disbursed as a negative number. The count sensors count only the chain, and not extrapolations from gears. This allows for operation in both manual and power modes. The Model 2000 does not depend on the ships power. Power is supplied by a built in lithium power supply that will last 8 to 10 years. Because the meter is always on, you do not have to be concerned with remembering to turn on a switch to count the chain. Should someone accidentally reset the chain counter, all display information will then be displayed, preceded by a plus (+) sign. The console provides switches for remote up and down functions, as well as meter reset. Night lighting is provided by internal illumination and is powered by external 8 to 32 volt DC ships instrument lighting.
This is THE top-of-the-line windlass for your yacht. Lighthouse stands behind their products and are wonderfull, co-operative people! Jordan at Lighthouse Mfg. will exchange the 24 volt motor for a 12 volt [or other available option] unit if requested. He also informs me the warrantee is still in full effect. The warrantee period begins when the windless is commisioned [placed in service]. You can confirm this if necessary by calling him at (951) six-eight-three-5078.
ALL ITEMS ARE NEW IN THE BOX. NEVER INSTALLED!
Current cheapest price I could find on the internet as follows:1501 w/reversing circuit: $7011.38Cockpit Remote w/counter: $812.22Roving Remote w/25' cable: $248.00Spare urethane base plate: $48.00TOTAL: $8119.60 plus tax and shipping
Buy mine and save $1000's!IGNORE THE "LOCAL PICK UP ONLY" ABOVE - Couldn't change it!Shipping will require an LTL (less than load) arrangement with a national shipper (Weight: 175#) on 2' x 4' pallet. Local pick-up encouraged.SHIPPING TO BE ARRAINGED BY AND PAID FOR BY THE BUYER!!! PICK-UP WILL BE IN CORTEZ, COLORADO, 81321.