Glen-L Tahoe 23 Wooden Boat

Description

Selling a custom built 23’ Glen-L Tahoe model. It looks like a classic 1940’s vintage boat but without all the maintenance and upkeep of a true wooden boat of that era. This one is very much maintenance free since it is completely encased in epoxy. Construction of this boat took five years, following the plans provided by Glen-L. Boat has plenty of power to pull water skiers or large fun tubes. Performs very well on the water, rides very nicely on inland lakes or river ways. Seats 7 adults comfortably. Has very little use, less than 50 hours.

Engine is cooled by traditional radiator/antifreeze which is then cooled by seawater intake which is expelled via the exhaust, cooling the exhaust manifolds. So seawater never comes in direct contact with the internal engine, prolonging its life if ever exposed to salt water. Also makes winterizing much easier since the engine only comes in contact with the antifreeze. Engine is a turn-key engine provided by Michigan Motorz along with transmission and all dashboard gauges. Basically just dropped the engine/transmission in and connected the dash gauges, very simple and trouble free.

Boat is meant to be trailered, not kept in the water for extended periods since the bottom is not painted with anti-fowling paint. It could be repainted with the anti-fowl and then kept dockside, but it is really too nice to be kept in the elements.

All upholstery was professionally done. Comes with a custom made matching cover for trailering. Trailer was custom built for this boat, complete with electric brakes. Includes a side ladder to get back aboard from the water, an anchor, dock bumper buoys, flag and lines. Two-Part dense closed cell foam was poured into the hull cavity to provide positive buoyancy in the event the boat takes on water and the bulge pump cannot keep up.

Specifications are –

Boat model - Glen-L Tahoe 23

Length - 23 feet

Beam - 6' 9"

Draft with prop - 22"

Weight -2,880 lbs (without trailer, 5,880 with trailer)

Engine - 5.7L (350cu) EFI, closed cooling system

Fuel - 23 gallons

Horsepower - 330hp

Transmission - ZF-45 1.25:1 ratio with 12 degree down angle

Propeller - 13"x16"

Speed - approx. 40mph at 5,000rpm

Construction -Wood - African Mahogany frames, stringers, battons, chine, 1/8" marine gradeplywood sides and base in alternate layers, (4 layers on the sides, 5 on thebottom), 1/8" finish African Mahogany on sides and bottom. Topside isHonduran Mahogany (native to Central America), 'Caulk' lines are Wenge wood (native to western Africa), outer edge on the top side isBloodwood (native to Brazil). The dash is made from Bubinga, (native toCentral Africa). Side and bottom are covered with fiberglass mesh (4 ozon the side and 6 oz on the bottom) embedded in epoxy. All exterior surface is finished with automotive clearcoat.

Paints -Bottom - Interlux Perfection Royal Blue YHA216

Water Line - Interlux Brightside Polyurethane 4207 Bristol Beige

Bilge - Interlux BilgeKote YMA100 Gray

Trailer -Custom made by Loadmaster Trailer, Port Huron, OH.

Weight approx 2,000lbs

Please ask any questions before bidding. I can provide assistance with any type of transportation needed.